grinding of crankshaft Archives - RA Power Solutions

Daihatsu 5DC-17 Undersize Bearings Availability and Crankshaft Repair

RA Power Solutions is proud to announce that we are saving the crankshaft of Daihatsu 5DC-17 from rejection by undertaking successful repair. As on date we have saved more than a hundred fifty crankshafts from rejection and have repaired them onsite without removing it from the engine block.

The Main Features of Repair of Daihatsu 5DC-17 Crankshaft by RA Power Solutions are as following:

RA Power Solutions is the only company in the world that can undertake grinding of Daihatsu 5DC-17 crankpins having a crankpin diameter of 145 mm and bearing length of only 64 mm which is considered to be very less for the placement of the on-site crankshaft grinding machine.
We have specially designed and dedicated onsite crankshaft grinding equipment which can be inserted from the engine block window to undertake the grinding of crankpins. No need for removing the crankshaft from the block & sending it to the workshop.
Damage to fillet radius is a serious issue with the crankshaft of Daihatsu 5DC-17. We undertake the repair of the fillet radius and do the grinding.
RA Power Solutions is the first and only company in the world that can undertake the grinding of crankshaft with a damaged fillet even while sailing the vessel.

Ready stock of Crankpin undersize Bearings

RA Power Solutions maintain a stock of undersize bearings which are required immediately after grinding. In most cases, we send our technicians along with the undersize bearing which facilitates immediate commissioning & operation of the engine after the grinding of crankshaft is done.
The Daihatsu 5DC-17 engine manufacturer recommends grinding of crankpin only up to 1.0 mm undersize. With our experience of more than 43 years in the repair of marine engine crankshafts, we have undersized the crankpins up to 3.0 mm and the engines are performing satisfactory.
The successful repair of the crankshaft has resulted in saving of huge amount for the owners of shipping companies.

Following Daihatsu 5DC-17 Bearings are Available and Ready in Stock.

Main Journal Bearings standard size.
Crankpin Bearings:
- 0.5 mm undersize
- 1.0 mm undersize
- 1.5 mm undersize
- 2.0 mm undersize
- 2.5 mm undersize
- 3.0 mm undersize

For your requirement of Repair of crankshaft of Daihatsu 5DC-17, bearings for Daihatsu engine and undersize crank pin bearings please contact RA Power Solutions or please Email us at rajshahani@rapowersolutions.com, info@rapowersolutions.com Call at +91 9582647131,+91 9810012383.

SHINSHIN Pump Spare Parts | Spare Parts of SHINSHIN Pump

RA Power Solutions is a trusted name in supplying Spare parts, grinding of crankshaft, crankpin repair, engine block repair, and engine overhauling services. Our experienced and well-qualified team always proved to be successful to meet client’s expectations. We are 41 years old company and the services provided by our company are prominent and superb.

We maintain a large stock of SHINSHIN pump spare parts and these spare parts are supplied in countries like Benin, Ghana, Burkina Faso, Ivory Coast, Nigeria, Mali, Liberia, Guinea, Niger, Cameroon, Equatorial Guinea, Sierra Leone, Gabon, Guinea-Bissau, Senegal, Gambia, etc.

We are an ISO 9001:2015 company dealing in the maintenance of medium and high-capacity engines understanding the importance of the quality of each spare part provided by us and are offering all the spare parts at the best prices all over the world. Our objective is to meet the client’s expectations on time.

WE SUPPLY THESE MODELS OF SPARE PARTS OF SHINSHIN PUMP:-

EHC-40A, 50A, 40B, 50BC, 65B, 65C, 80B, 80C, 80D, 100B, 100D, 125B, 125C, 125D, 125E, EHU-40A, 50B, NHG-0.5, NHGH-1.5-2.2.504, 5-7.5, 10-15, 20 NLG·1-4, 5-6, 7-5-10,12, 1520, 25, 30, SG-658, 65C, 65CX, 80B,80C, 100C, 80D, 100D, 125C, 150C, 200C, 200D, SVS 100, 150, 200, 250 & etc.

This blog is written by Mr. Raj Shahani (Managing Director of RA Power Solutions India Pvt. Ltd.).

Mr. Shahani is a highly experienced business leader with rich experience of more than 40 years in the field of Power, Heavy, and Shipping industry. He is Technical Adviser to many shipping and heavy industries across the globe.

Mr. Shahani is one of the most enthusiastic professional and he has all the brilliance of an exemplary leader. Mr. Shahani is an extremely effective coach and mentor of teams and is adept at providing leadership in a global, cross-cultural environment.

For more information on spare parts of SHINSHIN pump, pump spare parts supply contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

Daihatsu 6 DK-20 Crankshaft Repair | Onsite Grinding of Daihatsu Engine Crankshaft | Crankshaft Machining In Situ

RA Power Solutions was approached by a company based in Greece regarding a problem faced by them in their auxiliary engine of Daihatsu 6 DK-20.

It was reported that the bearing of crankpin no.3 got damaged.

THE ENGINE DETAILS OF DAIHATSU 6 DK-20 ENGINE ARE AS FOLLOWS:-

S. NO	Crankshaft Details
1	Engine Make	Daihatsu
2	Engine Model	6 DK-20
3	Crankpin Diameter Standard	170 mm
4	Crankpin Bearing Width	78 mm
5	Name of Vessel	MV ABBA

ACTION TAKEN BY RA POWER SOLUTIONS TO REPAIR THE CRANKSHAFT OF DAIHATSU 6 DK-20:-

Technicians on boarding the vessel inspected the crankshaft.
The hardness of crankpin no.3 was observed within limits between 210 to 240 HB scale.
After a thorough cleaning of crankpin No. 3, the MPI test was done and no cracks or abnormality was observed.
Crankpin no. 3 was subject to dimensional inspection.

FOLLOWING ARE THE MAIN OBSERVATIONS:-

a) Minimum diameter observed – 169.10 mm

b) Maximum diameter observed – 169.33 mm

c) Total ovality -0.40 mm

The crankshaft was already undersized to 169.50 mm against the standard size of 170.00 mm.

ACTION TAKEN BY RA POWER SOLUTIONS FOR REPAIR OF CRANKSHAFT OF DAIHATSU 6 DK-20:-

The onsite crankshaft grinding machine was set up and grinding of crankpin no.3 was undertaken by reducing the diameter by 1 mm.

a) The minimum diameter observed after grinding – 168.98 mm

b) Maximum diameter observed after grinding – 169.00 mm

c)Total ovality observed after grinding – 0.02 mm

After grinding crankpin no. 3, the engine was assembled and put on trial.
We will be pleased to share the original pre and final machining inspection reports duly signed by the chief engineer of the vessel which has all the technical details required for the successful repair of the crankshaft.

REPAIR OF CRANKSHAFT OF DAIHATSU 6 DK-20 HAVING CRANKPIN BEARING WIDTH OF ONLY 78 MM:-

It was possible for RA Power Solutions to successfully undertake repair of the crankpin having a bearing width of only 78 mm because we have the equipment which can be placed on the crankpin or main journal diameter having a bearing width of as small as 40 mm.

With this advanced technology and process, no other crankshaft repair company has due to which they either reject the crankshaft or recommend getting it repaired from the workshop.

**Crankpin of Daihatsu 6 DK-20 Engine Crankshaft before Repair**

**Magnetic Particle Test of Crankshaft of Daihatsu 6 DK-20 Engine**

**Repair of Crankshaft of Daihatsu 6 DK-20**

**Crankshaft Grinding of Daihatsu 6 DK-20**

We have been regularly executing the repairs in Greece, Moldova, Belarus, Australia, Austria, Belgium, Brazil, Cambodia, Colombia, Denmark, Ethiopia, Ghana, Haiti, etc.

This blog is written by Mr. Raj Shahani (Managing Director of RA Power Solutions India Pvt. Ltd.) and a highly experienced business leader with rich experience of more than 40 years in the field of Power, Heavy, and Shipping industry. He is Technical Adviser to many shipping and heavy industries across the globe.

Mr. Shahani is one of the most enthusiastic professionals and he has all the brilliance of an exemplary leader. He is an extremely effective coach and mentor of teams and is adept at providing leadership in a global, cross-cultural environment.

For more information on bearings for Daihatsu engine and Daihatsu crankshaft repair contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

Crankshaft Grinding | Crankshaft Repair Services

RA Power Solutions undertakes onsite crankshaft grinding and crankshaft repair for the diameter ranging from 30 mm to 700 mm.

The small diameter crankshaft is repaired on site without removing the crankshaft from the block. These services are of great use for the engines which are installed in construction-related equipment, compressors, and diesel-driven equipment operating in remote areas.

Our crankshaft repair services of crankshaft grinding and crankshaft repair are proven as we have been extending these services all over the world for the last forty years.

The main feature of onsite crankshaft grinding, onsite crankshaft repair, crankshaft polishing are as following:

RA Power design and manufactures on site crankshaft grinding equipment as per the site requirement and space constraints Hence there is no compromise with the quality after the repair of the crankshaft.
All the parameters of the crankshaft grinding are maintained strictly as per the manufacturer’s recommendations and tolerances. An inspection report in detail is submitted to the client.
In RA Power Solutions, we give great importance to the calibration of the crankshaft and inspection in detail by experienced technicians which helps us to plan the right strategy and selection of the right equipment for onsite grinding and onsite repair of crankshaft.
We possess the latest breed of inspection instruments including the instruments for the NDT test which helps us to find out the exact fault in the crankshaft resulting in successful repairs.
Replacement of crankshaft in case of breakdown by new crankshaft or reconditioned crankshaft is our expertise. The crankshaft of an auxiliary engine can also be replaced while sailing the vessel.

**Inspection of Crankpin is in Process**

**Grinding of Crankpin by Crankshaft Grinding Machine is in Process**

Our services for crankshaft grinding and repair are available 24*7. Technicians can fly down with portable lightweight crankshaft grinding machine in short notice to all over the world as they carry Indian CDC.

We have been regularly working for various models of engines like Wartsila, Daihatsu, MWM, Caterpillar, MaN, MaK, B&W, Sulzer, Bergen, Detroit Diesel, Stork Werkspoor, Pielstick, Deutz, Yanmar, MTU, Cummins, Nohab Polar, Caterpillar, Mitsubishi, Yanmar, MaK 551, MaK 552, MaK 453, MaK 451 AK, MaK 452 AK, Deutz 540, Deutz 358, Deutz 350, Pielstick PC 2.2 PC 2.5, Wartsila 524, Wartsila 824 TS, Sulzer 6 AL 25/30 and many more.

For more details regarding crankshaft grinding please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

**Crankshaft Grinding Service on Moving Vessel**

Crankshaft Repair | Crankshaft Grinding and Crankshaft Polishing – RA Power Solutions

The concept of onsite repair of crankshaft is getting popular with the introduction of a portable lightweight on-site crankshaft grinding machine. Now it is possible to undertake crankshaft repair, crankshaft grinding and polishing on site without dismantling the crankshaft from the engine.

On-site Crankshaft Repair, Crankshaft Grinding, and Crankshaft Polishing costs low with minimum downtime and inconvenience as it does not require removal of crankshaft from the engine block, packing, and transportation to the designated workshop for repair by grinding or polishing process.

Advantage of trusting RA Power solutions

First company based in Asia having experience of four decades in Crankshaft Repair, Crankshaft Grinding and Crankshaft Polishing.
All repairs of crankshaft and process followed for grinding of crankshaft and polishing of crankshaft are approved by class agencies of repute like DNV, Lloyds and various inspecting organisations spread all over the world.
The repair of crankshaft is executed with a guarantee for the satisfactory performance, the pre and final inspection reports before and after grinding and polishing crankshaft are submitted.
Technicians executing the repair of crankshaft onsite are highly skilled, trained in our factory on a dummy crankshaft in order to understand the techniques for successful repair of the crankshaft. Some of our technicians have experience of more than 45 years.
The onsite inspection and polishing of crankshaft repair is recommended to enhance the life of crankshaft and bearings.
RA power solutions offer and undertake inspection and polishing of crankshaft on board a vessel at a nominal cost.
During our working of four decades on diesel power plant, shipping companies we have undertaken Crankshaft Repair, Crankshaft Grinding and Crankshaft Polishing number exceeding more than 10,000.

Conclusion:

RA power solutions has team of technicians with valid CDC from Panama, Palau, and India and can travel all over the world with short notice.

For more details regarding crankshaft grinding, on site crankshaft repair, onsite crankshaft grinding and polishing please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Crankshaft Grinding Machine -Crankshaft Repair Tools- Mobile Machining of Crankshaft

In case of failure of crankshaft or bearing on a vessel/stationary power plant it results to extremely high cost for repairs and with long downtime. RA Power Solutions manufactures and exports onsite and insitu crankshaft grinding, and crankshaft grinding machine which saves considerable cost of repair and save time as disassembly of the crankshaft and transport to the workshop is not required.

The insitu crankshaft grinding machine performs and delivers the same quality standards which are achieved by old-designed, conventional bench-type crankshaft grinding machine.

Advantages of using RA Power Solutions Onsite Crankshaft Grinding Machine and Mobile Machine:

The company having more than 40 years of experience in grinding and repair of crankshafts of high-capacity marine and industrial engines and understands the importance of maintaining tolerances as per OEMs.
It is a highly advanced technology grinding machine which is designed to take the stress while machining and polishing of crankshaft, crankpin, and main journal.
Crankshaft Grinding Machine is lightweight and compact and can be easily taken to the site all over the world as accompanied baggage.

Crankshaft Grinding Machine Packed For Dispatch

Crankshaft Grinding Machine Accessories Packed for Dispatch

Customized tooling adapting to all makes of engine and models. Machine available in the range of 60 mm to 700 mm.
Onsite grinding of crankpin and main journal is possible with this grinding tool.
Onsite Crankshaft Machine is easy to operate and training is provided.
Machine body is made from titanium which results to the minimum vibration while in operation. Machines can be used on vessel while sailing.
The machine is designed to undertake onsite repair of crankshaft of all popular model of engines like Yanmar, Wartsila, Daihatsu, Man B&W, Mirrlees Blackstone, Ruston & Caterpillar, etc.

The company has sold more than 70 machines all over the world. It is highly recommended for repair workshops, power plants, shipping, and engineering companies.

For more information on crankshaft repair tools, and crankshaft grinding, please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Grinding of Crankshaft on a Moving Vessel

Grinding of Crankshaft in a Power Plant by Crankshaft Grinder

Grinding of Crankshaft on VBlock by Crankshaft Grinding Machine

Crankshaft Grinding Services by Experienced Technicians – RA Power Solutions

When it comes to maintaining marine engines, one vital aspect that deserves the utmost attention is the crankshaft. The crankshaft plays a crucial role in converting linear motion to rotational motion, and any wear or damage to this component can lead to a significant decrease in engine performance. However, thanks to the expertise of experienced technicians and specialized services like Crankshaft Grinding, marine engine owners can revitalize their crankshafts and restore optimal engine functionality. In this blog, we will delve into the significance of crankshaft grinding services and how they can breathe new life into your marine engines.

RA Power Solutions provides onsite crankshaft grinding services for last four decades. Crankshaft having diameter up to 700 mm is repaired onsite without removing the crankshaft from the engine block.

The grinding of crankshaft onsite is possible by introduction of onsite crankshaft grinding machine which is portable, light weight and can be inserted from the inspection window of the engine block. RA Power Solutions also manufactures and sells crankshaft grinding machine. The crankshaft grinding services are offered by us through our technicians who are well trained in our workshop and have experience of providing crankshaft grinding services for last 30 to 35 years. After repair of crankshaft, the dimensional tolerances are maintained within 20 to 30 microns and surface finish as per the international standards.

Prior to undertaking grinding of crankshaft, all the major parameters of crankshaft i.e. dimensional inspection, hardness test, crack detection, deflection, etc. are checked.

In case the basic parameters are found within the repair limits, crankshaft grinding is undertaken. RA Power Solutions can maintain the tolerances strictly as per the manufacturer’s recommendations. With the introduction of latest design of onsite crankshaft grinding machine the vibrations in the crankshaft grinding machine are reduced to minimum. This ensures maintenance of close tolerance and also facilitates grinding of crankshaft on board a vessel while it is sailing in high seas. The grinding of crankshaft while sailing of the vessel results to the considerable saving to the owners.

For more information on crankshaft grinding, repair of crankshaft, and onsite crankshaft grinding services please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Crankshaft Grinding and Crankshaft Repair by Experienced Technicians – RA Power Solutions

Crankshaft grinding and crankshaft repair are important for satisfactory performance of engine. RA Power Solutions Pvt. Ltd. has been undertaking crankshaft repair onsite by portable, light weight crankshaft grinding machine. The crankshaft repair is executed of crankshaft diameter ranging from 60 mm to 700 mm.

We have team of trained and dedicated technicians who are deputed to the site with crankshaft grinding machine along with necessary instruments. The crankshaft repair is undertaken without removing the crankshaft from the entablature.

Crankshaft Grinding of Wartsila Diesel Engine

The crankshaft grinding machine used to undertake crankshaft repair is of latest design having minimum vibrations. This facilitates our technicians to undertake crankshaft repair even while the vessel is sailing. The tolerance after crankshaft grinding and crankshaft repair is maintained within 10 to 20 microns in terms of taper and ovality.

The repair of crankshaft and overhauling of engine while sailing of the vessel between two ports results to the considerable saving to the ship owners as there is no need of holding the vessel at port or anchorage.

The crankshaft repair executed by us is guaranteed for the satisfactory performance. As on date we have executed more than 10,000 repair of crankshaft all over the world.

Crankshaft Grinding of MAN Diesel Engine

For more information on in situ crankshaft grinding machine and grinding of crankshaft please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Crankshaft Grinding – RA Power Solutions

Crankshaft grinding is undertaken by RA Power Solutions having four decades of experience in repair of crankshaft. We have technicians who are trained in our workshop giving them the job training for Grinding of crankshaft and repair of Crankshaft.

We use latest design of crankshaft grinding equipment which is vibration free and is capable to maintain close tolerances in terms of taper and ovality. Crankshaft grinding and crankshaft polishing is done in one setting thus reducing the time of crankshaft repair considerably.

Crankshaft grinding and repair is also undertaken on board the vessel and while the vessel is sailing.

Crankshaft Grinding Machine- Vibration Free

If you are in need of on site crankshaft grinding and repair, on-site crankshaft repair, and crankshaft polishing, please contact RA Power today. We will be happy to answer any of your questions. Dial +91 9582647131 or +91 9810012383 and email info@rapowersolutions.com, rajshahani@rapowersolutions.com for more detail.

Insitu Grinding of Crankshaft | Crankshaft Machining Insitu

Insitu grinding of crankshaft and polishing is offered by RA Power Solutions Pvt. Ltd. for last more than 3 decades. Our experienced technicians reach a site in the minimum possible time with the In situ crankshaft grinding machine and undertake crankshaft repair without removing the crankshaft from the main engine.

Insitu Crankshaft Grinding in Process — **Grinding of crankshaft**

Onsite Crankshaft Grinding Machine Ready for Dispatch

The In situ crankshaft grinding is undertaken by a lightweight portable In situ crankshaft grinding machine which is operated pneumatically. The equipment is of the latest design and is capable to maintain a close tolerance within 20 to 30 microns in terms of taper and ovality.

Onsite crankshaft grinding can also be undertaken while the vessel is sailing. This is possible due to continuous research and development done by our engineers to minimize the vibrations while the vessel is sailing. Our technicians hold valid seamen books and can sail if required. The time required for repair that involves crank pin grinding and polishing of crankshaft is minimum due to the latest design of our crankshaft grinding equipment executed by experienced technicians.

We can undertake grinding and polishing of crankshafts up to 700 mm diameter and have executed more than 10,000 repairs in our 36 years of experience worldwide. RA Power Solutions specializes in providing top-notch crankshaft machining in situ services.

The author of this blog is Raj Shahani, Managing Director of RA Power Solutions Pvt. Ltd. He has been working on crankshafts for last more than 43 years. The author had his training with leading crankshaft manufacturers like CKD Skoda in Pilsener Czech Republic, Sidenor in Spain, National Forge in Germany, etc.

For more updates on in situ crankshaft grinding, on site crankshaft grinding, grinding of crankshaft, in situ crankshaft grinding repair, onsite crankshaft machining, and crankshaft machining in situ email info@rapowersolutions.com, rajshahani@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.